Commercial Catalog

Reading’s Classic II™ aluminum service body combines the superior fuel economy and corrosion resistance of aluminum with Reading’s legendary quality and durability. Built with premium recycled aluminum alloy, the body is bathed in a zinc phosphate bath to prep it for improved adhesion of Reading’s durable powder coat finish, to resist corrosion better than any other service truck body on the market. It features all the standard and exclusive options that have made our flagship Classic II™ a leader in the truck body industry while offering environmental benefits that today’s consumers appreciate.

Standard features include a pressed diamond plate floor and inner tailgate surface, heavy-duty compartment doors and a rugged undercoated understructure for superior durability and strength. The Classic II™ aluminum service truck body also features Reading’s exclusive adjustable hidden hinges, Dual-Pro® door seals, a slam-action tailgate and much more. Add our industry-leading 10-year limited warranty and it’s easy to see why there’s No Body Better than the Classic II™.

There are many service bodies on the market, but there’s only one Classic II™. The Classic II™ steel service body, available for both single rear wheel and dual wheel chassis, is built with premium A60 coating-weight steel construction and our exclusive Triple Protection E-coat primer and powder coat finish to resist corrosion better than any other truck body on the market.

In addition, the Classic II™ offers features not found on any other service truck body. Our pressed diamond plate floor and inner tailgate surface provides superior strength and durability. Our patented hidden hinge system is fully adjustable and theft-resistant. Our exclusive Dual-Pro® seal system offers expanded door clearances and superior weather protection.

And that’s just the beginning. Add our industry-leading 6-year limited warranty and it’s easy to see why there’s No Body Better than the Classic II™.

The panel and tapered panel bodies offer interior work space with three or four full-length shelves on each side to provide carrying space for long-handled tools and equipment. In addition, they feature numerous exterior compartments with spring-loaded door holders on all vertical doors for ease of operation. Solid rear access doors lock securely with a two-point locking system.

Both the panel and tapered panel bodies are built on the Classic II™ service body and are available in heights of 50", 60" and 72". All models are available in fuel-saving aluminum or heavy-duty galvannealed steel. Panel and tapered panel bodies offer all the features you come to expect with a premium Reading truck body.

Reading’s SL service bodies feature the premium materials and quality construction Reading is famous for at an exceptional value. The SL is available in 98" single rear wheel, 108" and 132" dual rear wheel configurations. Both are available in standard and low-profile designs. You can get even more storage space with the Reading Spacemaker® option.

Every SL service truck body moves through our exclusive E-coat primer and powder coat finish process for outstanding rust and corrosion resistance. In addition, the SL service body offers numerous standard features and options, including Dual-Pro® door seals, an Aluma-Fill fuel cup, stainless steel rotary locks, a slam-action tailgate and much more.

Made in America and backed by our 6-year warranty, the SL service body offers unbeatable value.

Our high-capacity aluminum Classic Service Van offers an enclosed workspace for keeping everything safe and organized. Backed by an industry-leading 10-year warranty, the CSV is the mobile workspace of choice for telecom, plumbers, HVAC and utility contractors

When you’re searching for the best steel service vans, remember that we set the bar for durability, functionality and performance. Our Ready Van SL offers exceptional value and is backed by our industry-leading six-year warranty.

Haul the maximum payload in the most affordable way while boosting fuel economy. A heavy-duty understructure, rugged steel floor and sidewall construction provide long-lasting durability for working in rugged jobsites.

Features:
• Two-piece HRA1011 steel floor plate is fully seam welded, and includes angled sidewalls to floor to eliminate “bridging” of material.
• Full-depth rear corner posts with flame-cut hardware, “banjo eye” chain holders and tarp tension bar receivers.
• With an adjustable linkage, the forward tailgate release allows you to dump loads from a safer and more convenient location at the front of the body.
• Heavy-duty steel hinges with grease fittings for lubricating.
• The drop-down tailgate release is operated with a single, fast-acting lever.

Whatever you need to haul, the Reading Marauder SL dump body can get the job done. The Marauder SL dump body was designed to provide the most economical means to maximize your payload and increase fuel efficiency. The heavy-duty understructure, rugged steel floor and sidewall construction and high-capacity hoist will give you a tough, durable and reliable dump body. It is available in 9’ and 11’ lengths.

Features:
• Two-piece HRA1011 steel floor plate is fully seam welded, and includes angled sidewalls to floor to eliminate “bridging” of material.
• With an adjustable linkage, the forward tailgate release allows you to dump loads from a safer and more convenient location at the front of the body.
• The drop-down tailgate release is operated with a single, fast-acting lever.
• Full-depth rear corner posts with flame-cut hardware, “banjo eye” chain holders and tarp tension bar receivers.

Versatile and tough, our steel stake body offers a large open platform and steel stake racks for secure hauling of equipment and materials. It features A60 coating-weight steel finished with our exclusive E-coat primer and powder coat system for a durable finish.

Reading offers a variety of rack sets including steel stakes, low-profile contractor sides and Redi Racks, which are ideal for hauling bulk materials and pallets. Quick-release latches allow fast removal of individual racks for easy loading and unloading of materials. An optional scissor hoist is available.

Reading’s steel stake body is available in lengths from 10' to 26' with a 96"-wide body.

Ideal for hauling bulk materials and pallets, it features a large, open platform built from steel for strength and long-lasting durability Quick release steel stake rack sets allow for easy loading and unloading.

When you need a platform truck for hauling compact and heavy equipment or materials, transporting pallets and bales of hay or other applications, choose the Heavy-Duty Platform Body. Versatile and tough, our Heavy-Duty Platform Bodies are built with premium hot-rolled steel, have a variety of flooring options and come with a durable powder-coat finish that endures the environment.

The Redi-Dek™ platform body replaces a standard pickup bed with a convenient platform that can be customized to meet your needs. It features reinforced outside stake pockets on 2” steel tie-down rails, a steel slotted bulkhead and a steel treadplate floor with reinforced rear apron. It can be fitted with optional contractor sides, an overhead material rack,or a gooseneck trailer hitch to accommodate a range of uses.

Featuring premium heavy-duty steel and Reading’s exclusive E-Coat primer and powder coat finish, Redi-Dek will give you years of performance in tough job conditions. It is available in 8.5’, 10’, 11' and 12’ body lengths for an easy upfit.

The design is the result of over 40 years of custom body building experience coupled with valuable input from the end-user community and our loyal customer base. They include more standard features and benefits than our competitors standard production bodies — Feature Superior + Price Competitive = best overall VALUE available.

Designed and manufactured to withstand the harshest environments and most demanding field applications while providing the user with the highest quality, most user friendly, versatile, functional, and safe body available.

• The Master Mechanic™ Series 20 Series crane bodies are built for up to a 4,000 lb. crane.
• The Master Mechanic™ Series 25 Series crane bodies are built for up to a 5,000 lb. crane.
• The Master Mechanic™ Series 45 Series crane bodes are built for up to a 7,500 lb. crane.
• The Master Mechanic™ Series 78 Series crane bodes are built for up to a 12,000 lb. crane.

The premium A60 coating-weight steel makes it ideal for transporting loose, bulk or skidded material that's lighter in weight but still requires room. Constructed for long-lasting durability you can count on to work hard for you job after job. Available in 9' and 12' models.

Save money in fuel costs with the Aerocell van body. Designed with 3D CAD software, the Aerocell continues and enhances the lines of the cutaway van, creating a sleek look that allows smooth, quiet air flow. The result is substantial fuel savings… up to 20% better than conventional truck bodies have been reported by customers. That can mean thousands of dollars saved over the life of your truck! And all Unicell bodies are backed by a five year limited warranty.

The Aerocell CW features capacities up to 500 cubic feet, the Aerocell CW can handle heavy loads – up to 3,700 pounds – yet its cab-width size is slim enough for tight city streets and narrow driveways. It’s fuel-efficient!

With its aerodynamic shape, Aerocell CW will help save you time and money at the pump.

Now available on Chevrolet, GMC, and Ford cutaway single rear wheel chassis.

Traditionally styled for maximum cubic capacity, function, and all-around-town drivability, Unicell’s ClassiCube is the original in our line of one piece molded fiberglass truck bodies. Thousands of this model have gone to work all over North America.

The most practical body in today’s industry, the low-maintenance Unicell is easy to repair, beautifully shows off company graphics, and is built tough enough for heavy loads without increased weight. Handling GVWR’s up to 32,000#, these workhorses are spec’d with extra heavy duty features such as 3? structural steel crossmembers, wider rub rails, and front crash plates. Add these to the obvious aesthetic features of Unicell’s fiberglass bodies and you have a unique and good-looking, yet durable dry freight van. And all Unicell bodies are backed by a five year limited warranty.

Pro-Class Dump Body Features:
• Horizontal Lines and Gussets Have Smooth Rounded Corners for a Classy Modern Appearance
• Body Sides are Constructed of (2) Sheets of 10 ga Steel for Unsurpassed Strength and Durability
• Double Wall Sides Form a Fully Boxed Top Rail and Include 45º Sloped, Dirt Shedding Subrails
• The 94” Wide Body is Fully Welded and Made of 10 ga Steel Throughout
• Exclusive Quick-Latch® Tailgate Latching System Makes Tailgate Operations Simple and Easy
• The Body Understructure is Built with 3” Structural Steel Channels Spaced Every 12” and Supported by 5” Structural Channel Longitudinals
• High Lift Capacity Scissor Hoist with Factory Installed Body Prop is Standard Equipment

• 1/2" FRP Solid Bulkhead
• 12 Gauge Steel Flat Floor Frame
• 12 Gauge Steel Hat Section Cross Members on 16? Centers
• 10 Gauge Steel Floor Frame Rear Sill
• Galvanized Roof Bows on 16" Centers
• Insulated Ceiling w/ 3.4MM Luan Liner
• 2"x6" Shiplap Dense Pine Floor
• .032 Exterior Roof Aluminum
• .043 Exterior White Sidewall Aluminum
• 3/8" Plywood Sidewall Liner
• Extruded .125 Aluminum 3" Radius Corner Posts
• Extruded .125 Aluminum Roof Siderails
• .130 Aluminum Protective Rubrail
• Interior Dome Light with Switch
• Composite Roll Up Door
• Bottom Body Wrap
• Steel ICC Dock Bumper w/ Running Lights & Reflectors
• Rear Mud Flaps
• Complete Body Undercoating

• 3 Year Warranty
• 1/2" FRP Solid Bulkhead
• 1/2" FRP Side Walls
• 12 Gauge Steel Flat Floor Frame
• 12 Gauge Steel Hat Section Cross Memebers on 16" Centers
• 10 Gauge Steel Floor Frame Rear Sill
• Galvanized Roof Bows on 16" Centers
• 2"x6" Shiplap Dense Pine Floor
• .032 Extrior Roof Aluminum
• Extruded .125 Aluminum 3" Radius Corner Posts
• Extruded .125 Aluminum Roof Siderails
• .125 Aluminum Protective Rubrail
• Interior Dome Light with Switch
• Composite Roll Up Door
• Bottom Body Wrap
• Steel ICC Dock Bumper w/ Running Lights & Reflectors
• Rear Mud Flaps
• Complete Body Undercoating

• 3 Year Warranty
• 1/2” FRP Solid Bulkhead Wall
• 12 Gauge Steel Flat Floor Frame
• 12 Gauge Steel Hat Section XMembers on 16” Centers
• 10 Gauge Steel Floor Frame Rear Sill
• 2"x6" Shiplap Dense Southern Yellow Pine Floor
• 12 Gauge Steel Rear Door Structure
• Galvanized Roof Bows on 16” Centers
• .032 Exterior Roof Aluminum
• Aluminum Sidewall Frame Construction
• 1 1/2" Aluminum I-Beam Sidewall Studs On 16" Centers
• .043 Buck Riveted Exterior Aluminum Sidewall
• 3/8" Plywood Interior Sidewall Liner
• Extruded .125 Aluminum 3" Radius Corner Posts
• Extruded .125 Aluminum Roof Siderails
• .130 Aluminum Protective Rubrail
• Interior Dome Light with Switch
• Composite Roll Up Door
• Bottom Body Wrap
• Steel ICC Dock Bumper w/ Running Lights & Reflectors
• Rear Mud Flaps
• Complete Body Undercoating

• 3 Year Warranty
• 1/2" FRP Solid Bulkhead
• 12 Gauge Steel Flat Floor Frame
• 12 Gauge Steel Hat Section Cross Members on 16? Centers
• 10 Gauge Steel Floor Frame Rear Sill
• Galvanized Roof Bows on 16" Centers
• Insulated Ceiling w/ 3.4MM Luan Liner
• 2"x6" Shiplap Dense Pine Floor
• .032 Exterior Roof Aluminum
• .043 Exterior White Sidewall Aluminum
• 3/8" Plywood Sidewall Liner
• Extruded .125 Aluminum 3" Radius Corner Posts
• Extruded .125 Aluminum Roof Siderails
• .130 Aluminum Protective Rubrail
• Interior Dome Light with Switch
• Composite Roll Up Door
• Bottom Body Wrap
• Steel ICC Dock Bumper w/ Running Lights & Reflectors
• Rear Mud Flaps
• Complete Body Undercoating

• 3 Year Warranty
• 1/2" FRP Solid Bulkhead
• 1/2" FRP Side Walls
• 12 Gauge Steel Flat Floor Frame
• 12 Gauge Steel Hat Section Cross Memebers on 16" Centers
• 10 Gauge Steel Floor Frame Rear Sill
• Galvanized Roof Bows on 16" Centers
• 2"x6" Shiplap Dense Pine Floor
• .032 Extrior Roof Aluminum
• Extruded .125 Aluminum 3" Radius Corner Posts
• Extruded .125 Aluminum Roof Siderails
• .125 Aluminum Protective Rubrail
• Interior Dome Light with Switch
• Composite Roll Up Door
• Bottom Body Wrap
• Steel ICC Dock Bumper w/ Running Lights & Reflectors
• Rear Mud Flaps
• Complete Body Undercoating

• 3 Year Warranty
• 1/2” FRP Solid Bulkhead Wall
• 12 Gauge Steel Flat Floor Frame
• 12 Gauge Steel Hat Section XMembers on 16” Centers
• 10 Gauge Steel Floor Frame Rear Sill
• 2"x6" Shiplap Dense Southern Yellow Pine Floor
• 12 Gauge Steel Rear Door Structure
• Galvanized Roof Bows on 16” Centers
• .032 Exterior Roof Aluminum
• Aluminum Sidewall Frame Construction
• 1 1/2" Aluminum I-Beam Sidewall Studs On 16" Centers
• .043 Buck Riveted Exterior Aluminum Sidewall
• 3/8" Plywood Interior Sidewall Liner
• Extruded .125 Aluminum 3" Radius Corner Posts
• Extruded .125 Aluminum Roof Siderails
• .130 Aluminum Protective Rubrail
• Interior Dome Light with Switch
• Composite Roll Up Door
• Bottom Body Wrap
• Steel ICC Dock Bumper w/ Running Lights & Reflectors
• Rear Mud Flaps
• Complete Body Undercoating

The DuraClass Yardbird is the dump body of choice for contractors and municipalities who don't want to compromise on quality and durability. The Yardbird features our patented DuraClass design, with a continuous formed body sidewall and fully enclosed top rail for superior resistance to moisture and corrosion. Yardbird, like all DuraClass dump bodies, uses high tensile steel and fully welded construction for outstanding strength while saving precious weight.

The double-wall body side, a standard Yardbird feature, withstands punishing loads and always looks good. The full depth rear corner posts and enclosed front corner posts, plus our famous interlaced understructure give Yardbird uncommon strength and rigidity for a light duty dump body. Yardbirds come standard with quick release upper tailgate pins, 1/4 cabshield with window and heavy duty tailgate hardware. Choose from additional options including a crossmemberless understructure, drop sides, and stainless steel construction.

The Rugby Eliminator LP is the hardest working dump body in the landscape and light construction industries. When landscape and construction contractors need a productive, reliable, and versatile body, they chose the Eliminator LP time after time.

The steel model features a seamless, one-piece steel floor for optimum strength and durability. Full 9-foot floor length allows for full sheets of plywood or other materials. The Eliminator LP design also features front pillars that incorporate forward facing clearance lights positioned at a 45-degree angle at each corner. Rugby products feature light locations that may assist the installer in meeting FMVSS/CMVSS 108.

Rugby's Titan Series Dump Bodies are designed to meet your bigger capacity, class 5-7 needs. Titans feature a sleek yet strong look, a dirt-shedding top rail, 10 degree sloped tailgate and radius front corner posts.

The Z-Spec Dump Body is designed to be multi-functional, from the integrated 3/4 cab shield to the patented rear EZ-Latch system. This body, with its sleek styling will give you many features not found on conventional dump bodies such as the standard 22" rear board pockets that make hauling the heavy or bulky loads a breeze.

All Zoresco bodies are painted on carts, so there is never a danger of overspray onto the chassis. Additionally, the fully boxed top rail on all sides and tailgate can be painted underneath, offering maximum coverage and protection.

Vertical braces are on the sides and the tailgate, and the side rails are at a 45 degree angle to shed dirt, keeping you and those around you on the road safe.

A once piece floor, radius sides and interlaced cross members complete the construction of the body. Lights are recessed in the rear posts which are flush with the tailgate.

The Z-Spec Dump Body built with existing Rugby technology, integrated with Zoresco Equipment company specifications and coupled with a Rugby hoist give you a combination that can't beat.

Rugby’s “Landscape Body” is the most versatile and accessible body available. All Rugby Landscape Bodies are designed to meet the toughest standards, featuring a curbside swing-out door and rear barn doors over a drop down tailgate that employs Rugby’s revolutionary EZ-Latch system on the upper pins.

The popular Rugby VersaRack Landscaping Truck features eight removable heavy-duty panels that can be interlocked to provide an extremely rugged stake body, or easily removed, in whole, or in part, to adapt to changing needs on the job…remove all eight panels, and you have a platform body!

The Landscaping Truck front panels are 53” high and made from 14 gauge steel, corrugated for extra strength. The side and rear panels can be solid or vented and are made from 16 gauge steel that is reinforced with built-in corrugated ribs for added strength. The Landscaping Truck stake posts are on 24” centers with 42” tall panels that come in 4,5, or 6-foot sections depending on body length. All panels are removable with an easy to use lower latching mechanism. The 42” rear doors are vented 16 gauge barn door style swing out gates with greaseable hinges and door holdbacks.